.
.		 Comepa srl
via Metauro, 11
61033 Fermignano (PS)
Tel. (39) 0722 330048   Fax (39) 0722 332674
.
e-mail:   comepa@amdpaolini.com
The company Comepa LTD was founded in
October, 1 1996 as a result of the amalgamation
in one unique industrial reality of two previously
acquired companies, that determine its history.
NUOVA FEDERMECCANICA LTD, previously
located in S. Eraclio di Foligno (Perugia), was
founded in 1986 and began its production activity
with the costruction of the MV lattice steel
towers.

       Screw spikes for railway fastening		 Subsequently it has obtained the homologation
of the National electrification company (ENEL)
for the construction of the HV lattice steel towers
(the homologation is still valid at the moment of
acquisition). Step by step the company has
improved its techniques, specializing in the
construction of antenna towers, cross arms and
steel structures for the transformer units. Since
Jannuary 1996 it applied EN ISO 9002 norm to
the production cycle.

       Cutting, drilling and marking of the profiles:
       beams, angles, plates unp sized max 500mm
       working length of 13000mm.		 FEDERMECCANICA COSTRUZIONI LTD,
previously located in Trevi (Perugia), was founded
in 1964 and began its production activity with the
construction of the T-head bolts for railway
fastening.
Subsequently it has obtained the homologation
as the supplier of the National Railways (FFSS)
(the homologation is still valid at the moment of
acquisition). Step by step the company has
improved its techniques and expanded its range
of steel structures.

       Welding		 Comepa LTD besides being certified in
accordance with UNI EN ISO 9002 by the
Certifying authority ICIM, is also a qualified
supplier of the ENEL joint-stock company and
FFSS joint-stock company, it is certified by the
RINA for the qualification of welders and for the
welding process.

       CNC computer numerical control of FICEP 503 DB		 The company has a production line provided with
the CNC machinery for the manufacture of the
steel towers for electrification or antenna towers,
as well as a production line for the manufacture
of the hot stamped T-head bolts for railway
fastening. It has the CNC lines for cutting,
punching, marking of the angles up to 200x200,
as well as one combined CNC line for cutting,
drilling, marking of the profiles up to 500mm

  Preassembled lattice steel
                            tower on the ground		 and one CNC tool for punching, marking, drilling
if required for the plates up to 40mm thick and of
maximum weight substations, emergency stairs
and medium-heavy steel structures.
The company possesses as follows:
a sheltered of 3440mq which can be extented up
to 10/11000mq, external sites almost all asphalt
paved which can be extended up to 22400mq.
The laboratory for mechanical tests being located
inside the sheltered area, comprises a unit for
compression and rupture tests AMSLER for
490000 N and a hardness meter Vikers.
The finishing of all our products will be performed by dip galvanizing according to the CEI 7,6, the
minimum thickness of galvanization is 78 micron. the final painting done by Metalli Plastificati is
optional. This treatment, besides conferring a remarkable aesthetic aspect, contributes to the
insertion of the structure in the architecture milieu thanks to the complete range of the RAL colors
available.